Terciopelo Super Mink 0,12

1. Assess the natural lash carefully under magnification - at this diameter the assessment is the decisive step.
2. Cleanse and prime, then tape and map with conservative lengths throughout.
3. Lift each lash from the strip at the base rather than mid-fibre.
4. Isolate a single natural lash cleanly.
5. Dip the base into a fresh glue dot, coating enough to bond without a visible bead.
6. Place aligned along the natural lash and hold until it grabs.
7. Keep the longest lengths for a small number of the strongest lashes only.
8. Comb through, check for stickies, and cure fully.

• Applying on request without assessment - the client's brief does not decide this diameter; her lashes do.
• Combining 0.12 with long lengths - the two compound and the set sheds within days.
• Assuming thicker equals more durable - the reverse is usually true, because the base carries far more.
• Skipping the aftercare conversation - a heavy set punishes oil, friction and face-down sleeping harder than a light one.
• Using it to fake density - a thick classic set is not the same as volume, and a client wanting fullness will not be satisfied by a heavier single lash.

RETENTION TIPS FOR HEAVY CLASSIC SETS

At 0.12 the natural lash is carrying close to its practical limit, so retention depends on precision at the chair and discipline afterwards.

• Assess and, where necessary, decline - a set applied to lashes that cannot hold it fails within days regardless of technique.
• Align every base along the natural lash; misalignment is far less forgivable at this weight.
• Keep lengths conservative, since length multiplies the leverage a heavy fibre applies at the base.
• Book infills at 2-3 weeks; heavy sets shed more visibly and a long cycle turns an infill into a rebuild.
• Instruct daily cleansing with a lash-safe foam and total avoidance of oil-based eye products.

Materials: Super Mink PBT fibre on a 2mm easy-peel adhesive strip with foil backing. Formaldehyde-free, latex-free, vegan and cruelty-free. Patch test new clients for adhesive sensitivity before a full set.

How do I tell a client her lashes cannot take 0.12?

Frame it as outcome rather than refusal - explain that the set will shed within days on her lash type, and show her an alternative that gives comparable impact and actually lasts. Most clients care about the result, not the specification, once they are given a route to it.

Is 0.12 ever the right choice over a volume set?

When the client wants obvious impact but cannot commit to volume appointment lengths or maintenance, and her natural lashes are genuinely strong. It gives a bold result in a short appointment - which is a real advantage for some clients, not a compromise.

What length is safe at this diameter?

Conservative. As a rule of thumb, keep the extension close to the natural lash length rather than extending well beyond it, because leverage rather than weight is what fails first. A short 0.12 lash is far safer than a long one of the same weight.

Why does retention drop sharply after two weeks on heavy sets?

As the natural lash grows out, the attachment point moves further from the lid and the leverage on the base increases until it shears. That pattern is characteristic of a set at the edge of what the lash can carry, and the fix is a shorter infill cycle or a lighter specification.

Can I mix 0.12 with lighter diameters in one set?

Yes, and it is usually the smarter approach - 0.12 on the strong central lashes for impact, with lighter fibre through the inner corner and outer edge where lashes are finer. A mixed-weight map gives the visual effect without loading every lash equally.