¡Déjate llevar por el mejor pegamento del sector!
Dile adiós a los pegamentos débiles y poco confiables y dale la bienvenida a Hook-Up , la solución adhesiva definitiva para aplicaciones clásicas, de volumen y de pestañas postizas. Con una fuerte retención de hasta 6 a 8 semanas, tus clientas disfrutarán de pestañas hermosas y más duraderas.
- No permita que la humedad o la temperatura lo detengan: Hook-Up lo tiene cubierto ya sea que trabaje en un entorno seco o húmedo. Hook-Up es el pegamento más versátil del mercado, con un rango de funcionamiento de 30-70% de humedad relativa y un rango de temperatura de 18-22 grados Celsius.
- Fórmula sin formaldehído y con aroma a frutas: Hook-Up no solo es eficaz, sino que también es seguro. Nuestro pegamento resistente al aceite y sin látex ni formaldehído es la solución perfecta para clientes con piel sensible. ¡Y con un aroma a frutas frescas, tu estación de trabajo también olerá increíble!
- 5 ml de viscosidad media-fina: nuestra botella de 5 ml de pegamento de viscosidad media-fina tiene el tamaño perfecto para técnicos que están en movimiento o para aquellos que desean mantener sus suministros al mínimo. Y con su fórmula suave y fácil de usar, Hook-Up se convertirá en su pegamento de referencia para todas sus necesidades de amarre.
¿Cómo se utiliza?

-
Cuanto menor sea la humedad, más lento se secará el pegamento. Si el entorno es muy seco, el pegamento se secará muy lentamente . Si la humedad es muy alta, se secará MÁS RÁPIDO . En segundo lugar, la temperatura también puede afectar al pegamento. Cuanto más alta sea la temperatura, más fina será la viscosidad del pegamento. El pegamento tiende a derretirse con el calor alto. Cuando se está derritiendo, se vuelve más líquido y también se seca más rápido. Por lo tanto, la temperatura óptima es de 18 a 22 grados Celsius en un entorno bien ventilado.
- El pegamento mínimo crea una unión segura y fuerte con la pestaña natural. Sumerja de 2 a 3 mm de la base de la pestaña en el pegamento y aplíquelo sobre la pestaña aislada, a 0,5 mm de la línea de las pestañas. Asegúrese de agitar los pegamentos vigorosamente durante 45 a 60 segundos antes de usarlos.
Nota: Solo para uso profesional
¿Cómo almacenar?
- Lo ideal es guardarlos a temperaturas entre 2º - 10ºC (35º-50ºF) en el refrigerador si no los has abierto. Una vez sacados del refrigerador, espera a que vuelvan a temperatura ambiente antes de usarlos. Puedes esperar 5-10 minutos o sostenerlos en la palma de la mano. Se recomienda guardar los pegamentos abiertos en un recipiente hermético, ya sea en paquetes de arroz seco o de gel de sílice.
- Ingredientes: Alcoxi2-cianoacrilato, Cianoacrilato de etilo, Polimetilmetacrilato, pigmento.
Product details
- Instant Set, Faster Appointments: UV curing sets compatible adhesive on demand, cutting time spent waiting for glue to dry and freeing up room in your booking schedule.
- Total Control Over Every Cure: The light is on only while the pedal is pressed — no preset timers to work around, so you cure each bond exactly as long as you need.
- Precision Where You Need It: Dimmable output and an adjustable beam let you focus UV on the working area instead of flooding the entire eye zone.
- Ready for Any Studio: The four-wheel base rolls smoothly into place at the treatment bed, with no fixed mounting or setup needed.
- Technicians switching to UV adhesive: A dedicated, adjustable curing lamp that makes the move to UV systems straightforward.
- High-volume studios: Faster bonding helps keep a full appointment schedule on time.
- Lash educators and trainers: Precise beam and intensity control makes UV technique easy to demonstrate and teach.
- Multi-station salons: The lamp works on one client at a time, and its rolling base makes it easy to move from one treatment bed to the next between appointments.
The physical and technical features that define how the MasterSET Beam performs at the bed.
- 5W UV LED, 395–400nm: Matches the curing range of compatible UV lash adhesives
- Dimmable intensity knob: Adjust output to the working area and client comfort
- Adjustable lens (narrow to wide beam): Focus on a few lashes or cover the full lash line
- 360° flexible gooseneck: Angle the light precisely without repositioning the client
- Press-and-release foot pedal: Light on while pressed, off on release — hands stay on tweezers
- Four-wheel mobile base: Rolls smoothly into position at the treatment bed
- 5V–1A input with power adapter: Low-voltage, studio-friendly power
- Assemble the base, stand, lamp head, power adapter, and foot pedal using the setup instructions or assembly video.
- Ensure the client's eyes are fully closed and protected.
- Position the lamp head about 15 cm from the working area and set the beam width with the lens.
- Set the intensity — we recommend 30–50%, as the heat from higher settings may feel uncomfortable for sensitive clients.
- Place the extension using a compatible UV adhesive.
- Press and hold the pedal for the cure time below, then release.
Cure Time Guide (at 15 cm):
- 30% (recommended): ~4 seconds
- 50% (recommended): ~3 seconds
- 70%: ~2 seconds
- 100%: 0.5–1 second
- Using a non-UV adhesive → Use Curacoro UV InstaSet adhesives, or confirm other brands cure in the 395–400nm range.
- Running high intensity on sensitive clients → Work at 30–50% at about 15 cm; higher settings cure faster but produce more heat.
- Beam set too wide for isolated work → Narrow the lens to concentrate light on the bond point.
- Skipping eye protection → Confirm the client's eyes are closed and protected for every service.
- Poor lamp angle or distance → Reposition the gooseneck so light reaches the bond directly; a side angle can leave adhesive under-cured.
Power: 5W UV LED
Wavelength: 395–400nm
Input: 5V–1A
Intensity: Dimmable via control knob
Beam: Adjustable lens, narrow to wide
Arm: 360° flexible gooseneck
Base: Four-wheel mobile stand
Pedal Function: Press to turn on / release to turn off
Recommended Working Distance: 15 cm
Certifications: CE, FCC, EN 62471, RoHS
Use: Professional use only
Caution: Always use eye protection and ensure the client's eyes remain closed during curing. Use with caution on clients with photosensitivity or those taking medications that increase UV sensitivity.
My extensions aren't curing fully — what should I check?
First confirm your adhesive is UV-curable and compatible with the 395–400nm range. Then check that the lamp head is about 15 cm away and aimed directly at the bond point, and that you're holding the pedal for the full cure time for your intensity setting.
Does the foot pedal have a timer?
No. The light stays on only while the pedal is pressed and turns off the moment you release it. Time each cure yourself using the intensity and cure-time guide.
Can I use the MasterSET Beam with other brands' UV adhesives?
Yes, as long as the adhesive is formulated to cure in the 395–400nm range. Check the manufacturer's specifications before use; Curacoro UV InstaSet adhesives are designed to work with this lamp.
Is the MasterSET Beam suitable for clients with photosensitivity?
Use extra caution with clients who have photosensitivity or take medications that increase UV sensitivity, and confirm this before the service. Every client should keep their eyes closed with eye protection in place while the lamp is in use.
What intensity setting should I use?
We recommend 30–50% at about 15 cm, which cures in roughly 3–4 seconds while keeping clients comfortable. Higher settings cure faster — down to 0.5–1 second at 100% — but the added heat may feel uncomfortable for sensitive clients.